Polyaspartic Coating System
Tough Enough for Roofs. Engineered for Floors.
DuraGrand FX brings the same advanced polyurethane chemistry used in commercial roofing down to ground level—delivering a seamless, industrial-strength floor coating that’s stronger than epoxy, faster to install, and built to last through years of traffic, spills, and abuse.
Why It Works Better Than Epoxy
One-Day Installation
Fast-curing chemistry means less downtime. Most jobs are walk-ready in 30 minutes and fully load-bearing in 24 hours.
No Cracks. No Peeling.
Our system flexes with the concrete, resists impact damage, and permanently bonds to the substrate—no delamination.
Seamless, Watertight Protection
The coating cures as a single membrane, sealing out moisture, chemicals, and oil with zero joints or seams to fail.
UV & Temperature Resistant
Unlike epoxy, our aliphatic topcoat stays colorfast in sunlight and performs across extreme hot or cold environments.
Step-by-Step Installation
Our crews follow a strict, field-proven protocol that converts bare concrete into a chemical-tight, hammer-proof surface in a single shift—no open flames, no lingering odors, and minimal downtime.
01
Surface Prep
We begin with a moisture scan and surface profile reading. Then we shot-blast or diamond-grind the concrete to ensure a clean, porous surface. Cracks or spalls are patched with fast-curing polyurea.
02
Prime & Base Coat
A penetrating primer locks into the concrete. Then we pour a self-leveling polyaspartic membrane, forming the core protective barrier—joint-free and seamless.
03
Topcoat & Finish
An aliphatic UV-stable topcoat is applied for added protection and appearance. We offer optional slip-resistant quartz or grit finishes for high-traffic or wet areas.
Ready to Lock In Your Floor?
Let us assess your space and recommend the perfect system build for your traffic type, safety requirements, and environment.
Finish Options
Smooth Gray (Standard)
Clear Gloss
Safety Yellow (Zoning & Markings)
Quartz Broadcast (Slip-Resistant)
Custom Colors (Available Upon Request)
Frequently Asked Questions
Most projects are completed in a single day. Floors are walk-ready within 30 minutes after topcoat application and ready for full vehicle traffic in 24 hours.
Yes. Polyaspartic coatings cure faster, flex more with the slab, resist UV yellowing, and bond deeper into the concrete—making them more durable and longer-lasting than epoxy.
We offer optional quartz broadcast or aluminum oxide grit blended into the topcoat to meet OSHA traction requirements, especially for wet or high-traffic zones.
Yes. As long as the substrate is structurally sound, we’ll prep the surface with grinding and repair any cracks or spalls before coating to ensure full adhesion.
Absolutely. Once cured, the coating is VOC-free, antimicrobial, and USDA-compliant—safe for food handling, labs, and clean rooms.
Just routine cleaning—no waxing, buffing, or recoating required. The sealed surface resists stains, chemicals, and wear, keeping its finish for decades.